Digital Equipment DEClaser 320, Руководство по обслуживанию

Страница: 82 / 400

5.1 Error Code FIPs and Messages
Table 5–1 (Cont.) Error Code Master Lookup Table
Display
Code Full
Description Brief
Definition
0830
1
0831
0832
0833
0834
Section 6.5 Registration trailing edge jams
0901
3
0902
1
0903
1
0904
1
Section 5.17 Print drum cartridge end-of-life warning.
Print drum cartridge end of life.
Incompatible print drum installed.
Print drum cartridge is not installed.
0911
1
0912
Section 5.18 Developer cartridge end-of-life warning.
Developer cartridge end of life.
0913
1
0914
Section 5.17 Incompatible developer cartridge installed.
Developer cartridge write failure.
0921
3
0922
1
0923
1
0924
1
Section 5.19 Toner low warning.
Toner cartridge end of life.
Incompatible toner cartridge installed.
No toner cartridge installed.
1001
2
1002
2
1003
2
1004
2
1005
2
Section 5.20 Fuser failure.
Thermistor continuity failure (open circuit).
Fuser temperature too low.
Fuser temperature too high.
Fuser heater has been on too long.
1020
1
1021
1022
1023
1024
Section 6.6 Fuser jam when feeding from bypass slot.
Fuser jam when feeding from upper cassette.
Fuser jam when feeding from lower cassette.
Fuser jam when feeding from LCIT.
Fuser jam when feeding from duplex refeed.
1025
1
Section 6.7 Exit leading edge jam.
1026
1
Section 6.8 Exit trailing edge jam.
1111
1
Section 5.21 Output tray is full.
1120
1
Section 5.22 Offset home position sensor failure.
1
Printing stops, unless failover is selected, until operator attends to the offending problem. To
clear this error, a door sensor needs to actuate. If failover is successful, the Supplies indicator will
light and printing will continue. Press
3
to display the Supplies menu, which in not mentioned
elsewhere in the book.
2
Fatal error that occurs at power on and disables printer.
3
Printing continues but will soon stop. If the Supplies indicator lights, press
3
to display error.
(continued on next page)
5–4 Display Error Code FIPs