Digital Equipment DEClaser 320, Руководство по обслуживанию

Страница: 65 / 400

3.3 Test Print Menu
"
When the printer is printing, press
Test
to step through the following
informational displays. This information is also available through the 1701
special function codes, as shown in Table 3–1.
• J = Number of test prints since start of job
• S = Number of prints since power on
• L = Number of prints on this printer (Life count)
• X = Number of prints remaining on print drum
• D = Number of prints remaining on developer cartridge
• T = Number of prints remaining on developer cartridge
#
Press
3
to start or stop the continuous feeding print job.
$
Press
Test
to step through the C
)
W
)
B test prints. Figure 3–4, shows
examples of the three test patterns.
%
Press
Defaults
to change to the following feed device:
• 1 = Upper cassette
• 2 = Lower cassette
• 3 = LCIT feeding
• 4 = Manual feeding slot. Before manual feeding, you must set the
sheet size by using the special function test code 0281.10, as shown in
Table 3–1.
&
Press the
Online/Pause
to toggle the offset motor on and off for test
printing. The N and F characters stand for no-offset or offset.
'
Press
Set Up
to toggle between simplex or duplex paper paths for test
printing. The S or D characters identify the selected paper path.
Service Menus and Tests 3–13