Digital Acoustics TalkMaster FOCUS, Справочное руководство

Страница: 29 / 101

Setup Tab
23
20000. If the IP7 is configured using a Fixed RTP Port, it will override the Destination Port
assigned by the TalkMaster FOCUS Server.

For ii3 or IP7's configured without the RTP option, the Source Port will rotate between 5002 and
7002. Port 1459 will be used as the Destination Port.
If an IP Endpoint has been configured to use RTP, the audio will be sent via RTP to the automatically
assigned or fixed RTP Port of the IP Endpoint.
Send Pages via:
UDP Broadcast - By checking this box, audio will be sent to the group via UDP Broadcast. UDP
Broadcasts generate a single audio stream on your network that can be "heard" by all IP Intercoms/
Paging Endpoint. UDP Broadcasts do not typically cross subnets.
UDP Multicast - This option is only valid for the IP7 series intercoms and paging endpoints. By
checking this box, audio will be sent to each device in the group via UDP Multicast. Multicast capable
devices "subscribe" to a single audio stream sent by the Server. UDP Multicast must be properly
configured on the network for this to work.

Multicast Address /24 - Specify the first 24 bits of the Multicast Address that will be used
when pages are sent via UPD Multicast. The last 8 bits along with the destination port will be
rotated from 3 to 253 and will then be reset back to 3.
Note: If both Broadcast and Multicast are selected, IP7 Series devices will automatically use
Multicast and ii3 Series devices will use Broadcast.
System Tray Port - Allocates the port number used for the System tray tool to communicate with the
TalkMaster FOCUS Server. The System Tray Port icon to changes color to indicate the server status. If
the ICON is red, but the TalkMaster FOCUS Server is running, the port is most likely in use. Select a
different port and make the corresponding change in the Preferences for the system tray status ICON