Digital Acoustics TalkMaster FOCUS, Справочное руководство

Страница: 18 / 101

TalkMasterFOCUSAdminConsoleReferenceManual
12
When Endpoint Security is used, a security code or password is configured for each IP Endpoint in the
Admin Console and saved into the IP Endpoint. Once a Security code has been set, both the TalkMaster
FOCUS Server and IP Endpoint will issue "challenge-response" requests in order to establish a TCP
connection. The IP Endpoint will also issue a Challenge-Response request when ever it receives a UDP
command (such as a
FIND ALL request). If the correct security code is not received, the IP Endpoint will
not respond to the request.
In order to use Endpoint Security:

Check the Enable Endpoint Security option on the Setup --> Settings tab

If the same security code is to be used on each endpoint, enable the Security option on the
Endpoint Defaults tab and assign the default value

On the IP Endpoints --> General --> Configuration tab, make sue to press the Copy Defaults
button when adding (or updating) an IP Endpoint. This will automatically add the default security
code on the
IP Endpoints --> General --> Options 1 tab for the endpoint. A different Security
code can also be entered for each IP Endpoint

Once all of the IP Endpoints have been configured, make sure to use the menu option File -->
Export Settings to save all configuration information to a secure location. This action must also
be taken any time security codes change or new IP Endpoints are added or replaced

If the TalkMaster FOCUS Server ever needs to be restored, the File --> Import Settings option
must be used to restore all of the security information
Once a Security code has been saved in an IP Endpoint, it will no longer respond to a FIND ALL
discovery request and the IP Endpoint will not connect to the TalkMaster FOCUS Server unless the
correct Security code is provided.
If an IP Endpoint with a Security code attempts to connect to the TalkMaster FOCUS Server, but the
Security code in the IP Endpoints tab does not match, a Failed Authentication error will be listed in the
Audit tab:
and in the Windows Event Viewer - Application Log :