manualshive.com logo in svg

Digisol DG-FS4526E, Руководство по управлению

Поделиться
Скачать
Digisol DG-FS4526E Скачать руководство пользователя страница 954

C

HAPTER

 37

  |  Quality of Service Commands

–  954  –

violate-action

 - Action to take when rate exceeds the PIR. (There 

are not enough tokens in bucket BP to service the packet, the 

packet is set red.)

drop

 - Drops packet as required by exceed-action or violate-action.

transmit

 - Transmits without taking any action.

new-dscp

 - Differentiated Service Code Point (DSCP) value. 

(Range: 0-63)

D

EFAULT

 S

ETTING

 

None

C

OMMAND

 M

ODE

 

Policy Map Class Configuration

C

OMMAND

 U

SAGE

 

 

You can configure up to 16 policers (i.e., class maps) for ingress ports.

 

The 

committed-rate

 and 

peak-rate

 cannot exceed the configured 

interface speed, and the 

committed-burst

 and 

peak-burst

 cannot 

exceed 16 Mbytes.

 

The trTCM as defined in RFC 2698 meters a traffic stream and 

processes its packets based on two rates – Committed Information 

Rate (CIR) and Peak Information Rate (PIR), and their associated burst 

sizes - Committed Burst Size (BC) and Peak Burst Size (BP). 

 

The PHB label is composed of five bits, three bits for per-hop behavior, 

and two bits for the color scheme used to control queue congestion. A 

packet is marked red if it exceeds the PIR. Otherwise it is marked either 

yellow or green depending on whether it exceeds or doesn't exceed the 

CIR.

The trTCM is useful for ingress policing of a service, where a peak rate 

needs to be enforced separately from a committed rate.

 

The meter operates in one of two modes. In the color-blind mode, the 

meter assumes that the packet stream is uncolored. In color-aware 

mode the meter assumes that some preceding entity has pre-colored 

the incoming packet stream so that each packet is either green, yellow, 

or red. The marker (re)colors an IP packet according to the results of 

the meter. The color is coded in the DS field [RFC 2474] of the packet. 

 

The behavior of the meter is specified in terms of its mode and two 

token buckets, P and C, which are based on the rates PIR and CIR, 

respectively. The maximum size of the token bucket P is BP and the 

maximum size of the token bucket C is BC.

 

The token buckets P and C are initially (at time 0) full, that is, the token 

count Tp(0) = BP and the token count Tc(0) = BC. Thereafter, the token 

count Tp is incremented by one PIR times per second up to BP and the 

token count Tc is incremented by one CIR times per second up to BC. 

Содержание DG-FS4526E











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды