Digisol DG-FS4526E, Руководство по управлению

Страница: 59 / 1162

C
HAPTER
1 | Introduction
System Defaults
– 59 –
MED information can be used by SNMP applications to simplify
troubleshooting, enhance network management, and maintain an accurate
network topology.
E
THERNET
R
ING
P
ROTECTION
S
WITCHING
ERPS can also be used to increase the availability and robustness of
Ethernet rings, such as those used in Metropolitan Area Networks (MAN).
ERPS technology converges in a little over 50 ms. ERPS supports up to 255
nodes in the ring structure. And the convergence time is also independent
of the number of nodes in the ring.
S
YSTEM
D
EFAULTS
The switch’s system defaults are provided in the configuration file
“Factory_Default_Config.cfg.” To reset the switch defaults, this file should
be set as the startup configuration file.
The following table lists some of the basic system defaults.
Table 2: System Defaults
Function Parameter Default
Console Port Connection Baud Rate 115200 bps
Data bits 8
Stop bits 1
Parity none
Local Console Timeout 0 (disabled)
Authentication Privileged Exec Level Username “admin”
Password “admin”
Normal Exec Level Username “guest”
Password “guest”
Enable Privileged Exec from
Normal Exec Level
Password “super”
RADIUS Authentication Disabled
Authentication Disabled
802.1X Port Authentication Disabled
HTTPS Enabled
SSH Disabled
Port Security Disabled
IP Filtering Disabled
DHCP Snooping Disabled