Digisol DG-FS4526E, Руководство по управлению

Страница: 709 / 1162

C
HAPTER
24 | Authentication Commands
802.1X Port Authentication
– 709 –
C
OMMAND
U
SAGE
This command displays the following information:
Global 802.1X Parameters – Shows whether or not 802.1X port
authentication is globally enabled on the switch ( page 699 ).
Authenticator Parameters – Shows whether or not EAPOL pass-through
is enabled ( page 698 ).
Supplicant Parameters – Shows the supplicant user name used when
the switch responds to an MD5 challenge from an authenticator
( page 705 ).
802.1X Port Summary – Displays the port access control parameters
for each interface that has enabled 802.1X, including the following
items:
Type – Administrative state for port access control (Enabled,
Authenticator, or Supplicant).
Operation Mode – Allows single or multiple hosts ( page 700 ).
Control Mode – Dot1x port control mode ( page 701 ).
Authorized – Authorization status (yes or n/a - not authorized).
802.1X Port Details – Displays the port access control parameters for
each interface, including the following items:
Reauthentication – Periodic re-authentication ( page 702 ).
Reauth Period – Time after which a connected client must be re-
authenticated ( page 703 ).
Quiet Period – Time a port waits after Max Request Count is
exceeded before attempting to acquire a new client ( page 702 ).
TX Period – Time a port waits during authentication session before
re-transmitting EAP packet ( page 704 ).
Supplicant Timeout – Supplicant timeout.
Server Timeout – Server timeout.
Reauth Max Retries – Maximum number of reauthentication
attempts.
Max Request – Maximum number of times a port will retransmit an
EAP request/identity packet to the client before it times out the
authentication session ( page 700 ).
Operation Mode– Shows if single or multiple hosts (clients) can
connect to an 802.1X-authorized port.
Port Control–Shows the dot1x mode on a port as auto, force-
authorized, or force-unauthorized ( page 701 ).
Intrusion Action– Sets the port response to intrusion when
authentication fails ( page 699 ).
Supplicant– MAC address of authorized client.
Authenticator State Machine
State – Current state (including initialize, disconnected, connecting,
authenticating, authenticated, aborting, held, force_authorized,
force_unauthorized).
Reauth Count– Number of times connecting state is re-entered.
Current Identifier– The integer (0-255) used by the Authenticator to
identify the current authentication session.