Digisol DG-FS4526E, Руководство по управлению

Страница: 560 / 1162

C
HAPTER
19 | Using the Command Line Interface
CLI Command Groups
– 560 –
CLI C
OMMAND
G
ROUPS
The system commands can be broken down into the functional groups
shown below
.
Table 42: Command Group Index
Command Group Description Page
General Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
563
System Management Display and setting of system information, basic modes
of operation, maximum frame size, file management,
console port and telnet settings, system logs, SMTP
alerts, the system clock, and switch clustering
571
Simple Network
Management Protocol
Activates authentication failure traps; configures
community access strings, and trap receivers
633
Remote Monitoring Supports statistics, history, alarm and event groups 653
User Authentication Configures user names and passwords, logon access
using local or remote authentication, management
access through the web server, Telnet server and Secure
Shell; as well as port security, IEEE 802.1X port access
control, and restricted access based on specified IP
addresses
661
General Security
Measures
Segregates traffic for clients attached to common data
ports; and prevents unauthorized access by configuring
valid static or dynamic addresses, web authentication,
MAC address authentication, filtering DHCP requests and
replies, and discarding invalid ARP responses
715
Access Control List Provides filtering for IPv4 frames (based on address,
protocol, TCP/UDP port number or TCP control code),
IPv6 frames (based on address, DSCP traffic class, or
next header), or non-IP frames (based on MAC address
or Ethernet type)
761
Interface Configures the connection parameters for all Ethernet
ports, aggregated links, and VLANs
783
Link Aggregation Statically groups multiple ports into a single logical trunk;
configures Link Aggregation Control Protocol for port
trunks
803
Mirror Port Mirrors data to another port for analysis without affecting
the data passing through or the performance of the
monitored port
815
Rate Limit Controls the maximum rate for traffic transmitted or
received on a port
825
Automatic Traffic Control Configures bounding thresholds for broadcast and
multicast storms which can be used to trigger configured
rate limits or to shut down a port
827
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
841
Spanning Tree Configures Spanning Tree settings for the switch 847
ERPS Configures Ethernet Ring Protection Switching for
increased availability of Ethernet rings commonly used in
service provider networks
875
VLANs Configures VLAN settings, and defines port membership
for VLAN groups; also enables or configures private
VLANs, protocol VLANs, voice VLANs, and QinQ tunneling
887