manualshive.com logo in svg

Digisol DG-FS4526E, Руководство по управлению

Поделиться
Скачать
Digisol DG-FS4526E Скачать руководство пользователя страница 293

C

HAPTER

 14

  |  Security Measures

Network Access (MAC Address Authentication)

–  293  –

 

Multiple profiles can be specified in the Filter-ID attribute by using a 

semicolon to separate each profile. 
For example, the attribute “service-policy-in=pp1;rate-limit-

input=100” specifies that the diffserv profile name is “pp1,” and the 

ingress rate limit profile value is 100 kbps.

 

If duplicate profiles are passed in the Filter-ID attribute, then only the 

first profile is used. 
For example, if the attribute is “service-policy-in=p1;service-policy-

in=p2”, then the switch applies only the DiffServ profile “p1.”

 

Any unsupported profiles in the Filter-ID attribute are ignored. 
For example, if the attribute is “map-ip-dscp=2:3;service-policy-

in=p1,” then the switch ignores the “map-ip-dscp” profile.

 

When authentication is successful, the dynamic QoS information may 

not be passed from the RADIUS server due to one of the following 

conditions (authentication result remains unchanged):

 

The Filter-ID attribute cannot be found to carry the user profile.

 

The Filter-ID attribute is empty.

 

The Filter-ID attribute format for dynamic QoS assignment is 

unrecognizable (can not recognize the whole Filter-ID attribute).

 

Dynamic QoS assignment fails and the authentication result changes 

from success to failure when the following conditions occur:

 

Illegal characters found in a profile value (for example, a non-digital 

character in an 802.1p profile value).

 

Failure to configure the received profiles on the authenticated port.

 

When the last user logs off on a port with a dynamic QoS assignment, 

the switch restores the original QoS configuration for the port.

 

When a user attempts to log into the network with a returned dynamic 

QoS profile that is different from users already logged on to the same 

port, the user is denied access.

 

While a port has an assigned dynamic QoS profile, any manual QoS 

configuration changes only take effect after all users have logged off 

the port.

IP ACL

ip-access-group-in

=

ip-acl-name

ip-access-group-in=ipv4acl

IPv6 ACL

ipv6-access-group-in

=

ipv6-acl-name

ipv6-access-group-in=ipv6acl

MAC ACL

mac-access-group-in

=

mac-acl-name

mac-access-group-in=macAcl

Table 19: Dynamic QoS Profiles

 (Continued)

 

Profile

Attribute Syntax

Example

Содержание DG-FS4526E











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды