Digisol DG-FS4526E, Руководство по управлению

Страница: 1086 / 1162

C
HAPTER
43 | DHCP Commands
DHCP Client
– 1086 –
ip dhcp client
class-id
This command specifies the DCHP client vendor class identifier for the
current interface. Use the no form to remove the class identifier option
from the DHCP packet.
S
YNTAX
ip dhcp client class-id [ text text | hex hex ]
no ip dhcp client class-id
text - A text string. (Range: 1-32 characters)
hex - A hexadecimal value.
D
EFAULT
S
ETTING
Class identifier option enabled, with the name DG-FS4526E
C
OMMAND
M
ODE
Interface Configuration (VLAN)
C
OMMAND
U
SAGE
Use this command without any keyword to restore the default setting.
This command is used to identify the vendor class and configuration of
the switch to the DHCP server, which then uses this information to
decide on how to service the client or the type of information to return.
The general framework for this DHCP option is set out in RFC 2132
(Option 60). This information is used to convey configuration settings
or other identification information about a client, but the specific string
to use should be supplied by your service provider or network
administrator.
The server should reply with Option 43 information, which encapsulates
Option 66 attributes including the TFTP server name and boot file
name.
E
XAMPLE
Console(config)#interface vlan 2
Console(config-if)#ip dhcp client class-id hex 00177C666572
Console(config-if)#
R
ELATED
C
OMMANDS
ip dhcp restart client (1086)
ip dhcp restart client
This command submits a BOOTP or DHCP client request.
D
EFAULT
S
ETTING
None