manualshive.com logo in svg

Digisol DG-FS4526E, Руководство по управлению

Поделиться
Скачать
Digisol DG-FS4526E Скачать руководство пользователя страница 183

C

HAPTER

 6

  |  VLAN Configuration

IEEE 802.1Q Tunneling

–  183  –

Layer 2 Flow for Packets Coming into a Tunnel Uplink Port

An uplink port receives one of the following packets:

 

Untagged

 

One tag (CVLAN or SPVLAN)

 

Double tag (CVLAN + SPVLAN)

The ingress process does source and destination lookups. If both lookups 

are successful, the ingress process writes the packet to memory. Then the 

egress process transmits the packet. Packets entering a QinQ uplink port 

are processed in the following manner:

1.

If incoming packets are untagged, the PVID VLAN native tag is added.

2.

If the ether-type of an incoming packet (single or double tagged) is not 
equal to the TPID of the uplink port, the VLAN tag is determined to be a 

Customer VLAN (CVLAN) tag. The uplink port’s PVID VLAN native tag is 

added to the packet. This outer tag is used for learning and switching 

packets within the service provider’s network. The TPID must be 

configured on a per port basis, and the verification cannot be disabled. 

3.

If the ether-type of an incoming packet (single or double tagged) is 
equal to the TPID of the uplink port, no new VLAN tag is added. If the 

uplink port is not the member of the outer VLAN of the incoming 

packets, the packet will be dropped when ingress filtering is enabled. If 

ingress filtering is not enabled, the packet will still be forwarded. If the 

VLAN is not listed in the VLAN table, the packet will be dropped.

4.

After successful source and destination lookups, the packet is double 
tagged. The switch uses the TPID of 0x8100 to indicate that an 

incoming packet is double-tagged. If the outer tag of an incoming 

double-tagged packet is equal to the port TPID and the inner tag is 

0x8100, it is treated as a double-tagged packet. If a single-tagged 

packet has 0x8100 as its TPID, and port TPID is not 0x8100, a new 

VLAN tag is added and it is also treated as double-tagged packet.

5.

If the destination address lookup fails, the packet is sent to all member 
ports of the outer tag's VLAN.

6.

After packet classification, the packet is written to memory for 
processing as a single-tagged or double-tagged packet.

7.

The switch sends the packet to the proper egress port.

8.

If the egress port is an untagged member of the SPVLAN, the outer tag 
will be stripped. If it is a tagged member, the outgoing packet will have 

two tags.

Содержание DG-FS4526E











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды