Digimerge VCD304161 Скачать руководство пользователя страница 90

Страница: 90 / 91

Example:

Motion Alarm turned

On:

DVR settings:
All cameras are scheduled for CM recording (SETUP

Camera

Schedule)

The Recording IPS is set to 2 for all cameras. (SETUP

Camera

Recording)

The Motion Alarm is turned

and the Motion Alarm IPS is set to 15 for all cameras (SETUP

Alarm

Motion Alarm)

Each camera will record as follows:
Continuous recording will at 2 IPS
Motion Alarm recording will at 15 IPS

Motion Alarm turned

Off:

DVR settings:
All cameras are scheduled for CM recording (SETUP

Camera

Schedule)

The Recording IPS is set to 2 for all cameras. (SETUP

Camera

Recording)

The Motion Alarm is turned

Off

and the Motion Alarm IPS is set for 15 for all cameras (SETUP

Alarm

Motion Alarm)

Each camera will record as follows:
Continuous recording will at 2 IPS
Motion recording will at 2 IPS

When the Motion Alarm is turned on, the following occurs:

•

Each motion is logged as a separate event, and is listed under:

Event Search

•

When motion is detected:

The following messages will appear on the corresponding camera channel (in addition to the

notation in the top right corner of each channel):

for motion recording

for alarm recording

The following will appear on the bottom right corner of the monitor:

for alarm detected

•

Event Notification can be used on the DVR to send notification (by email or via Remote Agent) whenever
motion is detected. Remote Agent can be configured to sound an alarm and to open the camera in full screen
whenever motion is detected.

Содержание VCD304161




























































































Результаты поиска

Содержание VCD304161

Отзывы:

Digimerge VCD304161, Инструкция по установке и эксплуатации, Страница: 90 / 91

Результаты поиска

Содержание VCD304161

Отзывы: