Digimerge VCD304161, Инструкция по установке и эксплуатации

Страница: 44 / 91

35
5.6 Recorder-Passwords
Set the system passwords for <Admin> and <User>. <Admin> can do the setting for the password only. Each user has to
input a designated password to log-on the system. Set the password after selecting the [Admin] and [User] by pressing
the arrow button.
5.6.1. User
Select the user to set the password. The administrator can select the <User> password and the entire category. The
maximum number of <User> is five (5), and the settings can be done differently for all.
5.6.2. Password
Select the password to change the maximum number of characters to four (4). The following screen will appear below
when the [Enter] button on [New] category is pressed. Enter the desired password and press the [OK] button to save.
Note To go inside the editing state, use the [Enter] button on the Front Panel or IR Remote Controller and insert the
number by using the number button on the remote controller. After the editing is finished, to enter the password,
use the [Enter] button on the Front Panel or IR Remote Controller again.