Digimerge VCD304161, Инструкция по установке и эксплуатации

Страница: 34 / 91

25
5.1.3. Spot-out Dwell
Set the screen sequencing of the connected monitor, which has been connected to the product by external output.
Select setting are 1~60secs. The external output cannot use other functions except when seeing the image on the screen.
Press the [Select Camera] button and the following screen will appear.
The user can select the cameras to see as an external output. Select [All], and all the channels will be selected. The user
can select the channels to see the screen sequencing, by choosing the channel numbers from the Menu.
5.1.4. IR Remote Controller
An IR Remote Controller ID can control several units at once using one remote controller. Thus, an ID will be required to
set the control for each unit with one Remote Controller.
Below is the method to set the ID of the IR Remote Controller. Default ID is 00.
1. Insert battery into IR Remote Controller. (AAA Size
×
2)
2. Press the [F1] and [F2] buttons of the IR Remote Controller together for more than 2 seconds.
3. Check if the LED lights up on the IR Remote Controller.
4. Press the ID Number between 00~99 by using the number button of the IR Remote Controller (ex: 03, 55).
5. By using the direction key on the Front Panel, designate the ID number the same as what’s set on the IR
Remote Controller
6. Save the ID setting by pressing the [OK] button on the screen.
Note All the systems have the same ID as the default when it is out from the factory. Therefore, if the same default
value is used, one IR Remote Controller will control several systems at once. To prevent this, it is advisable to
set your own ID for each system. It is easy to change the ID of the IR Remote Controller. The user can change
the Remote Controller ID to control several systems separately.