Digimerge VCD304161, Инструкция по установке и эксплуатации, Страница: 37 / 91

28
5.2.1. Date and Time
Insert the exact date and time. Press the [Enter] button and the state will change to the input date. Input the time and date
of the system accurately, as it plays an important role in solving any problem with recorded image or event log.
The current time and date is stored in each recorded image with precision, as they are displayed during playback.
Be cautious that, if the time and date stored in recorded images are wrong, they cannot be altered afterwards, due to
encryption.
Note Users can change the time and date in the future without any problem. However, difficulty arises when
changing it to a previous date and time (the same files might exist in the hard disk). Therefore, under complex
record settings, unexpected problems might arise in the system.
Note When a long time has elapsed after setting the date/time, it can be distorted. To maintain the exact time, the
date/time setting should be set once a month.
5.2.2. Date Format
Set the date display format. Use the arrow button to select the desired format in the date display format.
5.2.3. Time Format
Set the time display format. Time format can be selected either by a 24-hour or 12-hour base (AM or PM).
5.2.4. Daylight Saving
Select the daylight saving time for each country. Daylight saving time setting is automatically processed when the country
is selected. Supported countries are displayed in the table below.
No. Country Representative Region No. Country Representative Region
1 None GMT 14 Italy Europe/Rome
2 Australia Australia/Melbourne 15 Mexico Mexico/General
3 Austria Europe/Vienna 16 Holland Europe/Amsterdam
4 Belgium Europe/Brussels 17 Norway Europe/Oslo
5 Brazil Brazil/East 18 Poland Europe/Warsaw
6 Canada Canada/Eastern 19 Portugal Portugal
7 Denmark Europe/Copenhagen 20 Russia Moscow
8 Egypt Egypt 21 Slovakia Slovakia
9 Finland Europe/Helsinki 22 Spain Europe/Madrid
10 France Europe/Paris 23 Sweden Europe/Stockholm
11 Germany Europe/Berlin 24 Switzerland Europe/Zurich
12 Greece Europe/Athens 25 UK Europe/London
13 Israel Israel 26 US US/Eastern
5.2.5. Time Sync Server
This is a function that synchronizes the time of the DVR to be exactly the same as the server, without setting the time for
each DVR. Tick the [USE] category and enter the server IP address of the connected server.
The time will be synchronized every hour.