Digimerge VCD304161, Инструкция по установке и эксплуатации

Страница: 58 / 91

49
After pressing the [Holiday Setup] button, the screen below will be displayed.
Use this function when assigning other holidays, other than Saturday and Sunday. The method to assign a holiday is as
followings.
1. Move cursor to 01/01 (month/day) on the center of bottom.
2. Put the cursor in the number section and input the month/date by pressing the [Up] and [Down] button on the
Front Panel or IR Remote Controller.
3. After inputting the desired holiday date, press the [Add] button on the right side.
4. Check whether the assigned date has been inputted on the screen.
5. To move the screen, use the [Up] and [Down] buttons.
6. Close the screen by pressing the [Close] button and enter the schedule setup screen.
It will be included under Sat in Hol category when it is holiday. Set recording schedule from the category.