Digimerge VCD304161 страница 3 Скачать руководство пользователя | Manualshive

Страница: 3 / 91

background image

Cautions

Read Before System Operation

Follow these details to prevent material damage or personal injury.

Signs of Caution and Warning

Warning: This sign indicates that the user could die or be seriously wounded if not used or

installed properly.

Caution: This sign indicates that the user could be wounded or could expect property damage

if not used or installed properly.

Warning: Do not expose the product to fog, rain or too much humid to decrease danger from

electric shock or fire

.

Important Safeguards

Warning

1. Change the battery after turning the off the power of the product.
2. Check the polarity of the lithium battery while changing.
3. Change the battery with the same one, which is in the product or with the similar type recommended by your vendor.
4. Dispose of the changed battery according to the instructions of the battery manufacturer.

※

There is danger of explosion when instructions are not followed.

General Warning

Warning

1. Use the power cord, which is supplied or recommended by the supplier.

It may cause fire.

2. Do not dismantle or assemble the product.

It may cause malfunction or fire.

3. Enquire from your vendor for repair.

It may cause electric shock or fire if the repair is not done properly.

4. Do not touch the product with wet hands.

It may cause malfunction or electric shock.

5. Matters must be ensured to a professional for product installation.

It may cause malfunction, electric shock or fire.

6. Consult the place of purchase if the need for installation arises.

Delinquent installation may be the reason for malfunction, electric shock or fire.

7. Ground applies to video products equipped with a 3-wire grounding type plug having a third (grounding) pin.

This plug only fits into a grounding-type power outlet.
If grounding is not done, it may cause malfunction or electric shock.

8. Ground connection must not touch gas pipe, water pipe or telephone line.

If grounding is not done properly, it may cause electric shock.

9. Prevent metallic foreign substance from going inside the product.

It may cause malfunction or electric shock.

10. Do not spray insecticide or flammable spray while driving.

It may cause fire.

11. Prevent water from entering inside electrical parts.

Clean with a dry towel or malfunction or electric shock could result.

«
1
2
3
4
5
...
»

Содержание VCD304161




























































































Отзывы:

Нет отзывов

Похожие инструкции для VCD304161

Бренд: Yamaha Страницы: 39

Beep VU WiFi NVR Kit

Бренд: Trivest Страницы: 14

Бренд: IOT-Smart Solutions Страницы: 13

Бренд: G-Lenz Security Страницы: 68

Бренд: Channel Vision Страницы: 51

Бренд: TeVii Страницы: 23

Бренд: FLIR Страницы: 131

TBK-DVR1100 Series

Бренд: TBK vision Страницы: 208

Бренд: ACTi Страницы: 13

Бренд: ACTi Страницы: 15

Бренд: ACTi Страницы: 121

Бренд: COP Security Страницы: 40

Бренд: Interlogix Страницы: 8

TruVision DVR 11

Бренд: Interlogix Страницы: 68

TruVision NVR 71

Бренд: Interlogix Страницы: 143

Бренд: WatchNet Страницы: 2

Бренд: WatchNet Страницы: 2

Бренд: Planet Networking & Communication Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды