Digimerge VCD304161 Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 91

Digimerge VCD304161 Скачать руководство пользователя страница 71

62

5.20.2.

Email Notify

Tick the [Email Notify] category for the user to get the event by e-mail.
Press the [Email List] button and the menu to enter the e-mail address will appear.
Move the cursor to the [Email] input column, and press [Enter]. A virtual keyboard will appear, enabling the user to input
the e-mail address. To add more e-mail addresses, enter the [Add] button.

5.20.3.

Host Name

Enter the host name for the DVR when an event occurs. If several DVR’ s are used, different names should be used to
differentiate the DVR, when event happens. Press the [Edit] button and a virtual keyboard will appear to enter DVR’ s
name.

5.20.4.

SMTP Server

Enter the servers IP to receive e-mail after an event activates on the image. Tick the [Login] before using the server ID
and Password. Enter the SMTP ID and SMTP Password.

5.20.5.

SMTP ID

Input the ID of the e-mail for the event-activating image. Press the [Edit] button and a virtual keyboard will appear
to enter the ID. If User ID is not entered there should be no problem with image transmission.

5.20.6.

SMTP Password

Input the ID of the SMTP server. Press the [Edit] button and a virtual keyboard will appear

Note If there are many users, the SMTP server can be used without an ID and Password. Tick off [Login] before

entering the SMTP IP .

«
...
69
70
71
72
73
...
»

Содержание VCD304161




























































































Отзывы:

Нет отзывов