Digimerge VCD304161, Инструкция по установке и эксплуатации, Страница: 60 / 91

51
5.11.2. Contrast
Adjust the contrast, which is a ratio of brightness to darkness for the image. Greater the value; bright side becomes
brighter, and dark side becomes darker. If the value is increased to the extent where too much saturation is not observed
in the image, higher contrast can be helpful to display the image vividly.
5.11.3. Color
Adjust the color density. In most cases, except for the deterioration of cameras or very low quality cameras, the
adjustment of this value is not required.
5.11.4. Tint
Set the color hue of connected cameras. In most cases, except for the deterioration of cameras or very low quality
cameras, the adjustment of this value is not required.
5.11.5. Sharp
Increase the clarity by increasing the sharpness of the image. It is efficient when objects blur, but it is not recommendable
to use the setting value too high, as the picture quality will become lower.
5.11.6.
AGC
This function increases the signal automatically in dark places, to brighten the picture. When it is OFF, the image will be
shown as it is, and when it is ON, it will make a great change on the picture.