Digifly Cartesio plus Скачать руководство пользователя страница 8

Страница: 8 / 72

Page 8

GETTING STARTED

2.1

GUIDE TO SOCKETS

2.2

BATTERIES

2.2.1

BATTERY TYPES ( "PRO" MODELS )

The Digifly instrument "PRO" models (Cartesio Pro BT , Leonardo Pro and Leonardo Pro

BT ) are supplied with a high power, fully independent, automatic double battery system:

The main power is supplied by an internal rechargeable lithium battery (supplied as

standard) with a full recharge time of only 3 hours. This battery has no memory effect,

so it can be partially recharged, it also has a very low self discharge rate (more than one

year) and works very well at low temperatures. Battery life ranges from 30 hours to 200

hours depending on whether GPS or Bluetooth has been activated.

The backup battery is a high power non-rechargable 1.5 volt AA size battery. This battery

is situated in the removable battery "slot" and can also be replaced with other 1.5 volt

AA size batteries. To change this battery you will need a flat-blade screwdriver to

unscrew the battery cover on the rear of the vario. Rechargeable batteries can be used,

though are not recommended for the backup battery system because of their high self

discharge rate (after 2 months they are completely discharged and useless). If using a

rechargable backup battery, note that this battery is not recharged by the instrument

but has to be removed and recharged externally by the user. The backup battery life

ranges from 20 hours to 200 hours depending on whether GPS or Bluetooth has been

activated

2.2.2

BATTERY TYPES ( "PLUS" MODEL )

The Cartesio Plus model has only one non-rechargable 1.5 volt AA size battery. This

battery is situated in the removable battery "slot" and can also be replaced with other

1.5 volt AA size batteries. To change this battery you will need a flat-blade screwdriver to

Содержание Cartesio plus









































































Результаты поиска

Содержание Cartesio plus

Отзывы:

Похожие инструкции для Cartesio plus

Бренды по названию

Популярные бренды

Digifly Cartesio plus, Руководство пользователя

Результаты поиска

Содержание Cartesio plus

Отзывы:

Похожие инструкции для Cartesio plus

Бренды по названию

Популярные бренды