Digifly Cartesio plus Скачать руководство пользователя страница 27

Страница: 27 / 72

Page 27

5.2.4

INTEGRATED (AVERAGED) VARIO

The integrated vario (highlighted here red) is an average vario

reading. This time over which the reading is averaged is adjustable.

The data in this display field is always “highlighted” to make

reading in flight easier.

You can change the integration interval by setting parameter (MAIN

SETUP \ n. 6 INTE) between “0” and “60” seconds.

It can be delayed or immediate. If you set a value that is too low,

its value will be close to the instantaneous reading. Normally this is

the most common setting. It can also be used for example to see if the rate of lift or sink

is improving or getting worse. If the integrated vario reading over a number of seconds

is higher than the actual reading, it means that you are doing worse than before.

5.2.5

ACOUSTIC VARIO

The acoustic vario represents the instantaneous values of the vario with a modulated

tone.

The volume of the tone is adjustable over three levels “HIGH”, “OFF” & “LOW”, by

pressing the

key (long pressure). The volume level selected is shown by a change in

the “speaker” graphic at the bottom of the screen.

You can set the threshold level for the Digifly instrument to indicate lift, go to (MAIN

SETUP \ n. 2 V.UP) and sink, go to (MAIN SETUP \ n. 3 V.DN).

To change the vario tone based on your personal preferences, you can adjust the

acoustic vario tone modulation, go to (MAIN SETUP \ n. 4 TONE).

5.2.6

VARIO SIMULATOR

The vario simulator is very useful to check your acoustic vario settings without the need

to test it in real flight.

To activate the vario simulator go to (MAIN SETUP \ n. 8 SIMV) and select “ON”. Once in

vario simulator mode is possible to change the vario value using the keys

To deactivate the vario simulator go to (MAIN SETUP \ n. 8 SIMV) and select “OFF”. For

safety reason the vario simulator is always turned off when you switch off the

instrument.

Содержание Cartesio plus









































































Результаты поиска

Содержание Cartesio plus

Отзывы:

Похожие инструкции для Cartesio plus

Бренды по названию

Популярные бренды

Digifly Cartesio plus, Руководство пользователя

Результаты поиска

Содержание Cartesio plus

Отзывы:

Похожие инструкции для Cartesio plus

Бренды по названию

Популярные бренды