background image

Page 26 

5.2

 

VARIOMETER 

 

5.2.1

 

SUPERFAST INTELLIVARIO 

ƒ

 

The Intellivario is a revolutionary system designed by Digifly which is based on the use 

of sophisticated digital filters. This results in a very sensitive vario and is immune to 

radio interference. All the variometric functions are subject to these filters.  

ƒ

 

The Digifly instrument has a very fast pressure sensor and an excellent data acquisition 

system that allows the instrument to perform as a very fast and accurate vario (updated 

20 times a second). 

 

5.2.2

 

VARIO REACTIVITY 

ƒ

 

To adjust the reactivity of the vario, go to (MAIN SETUP \ n. 5 RVAR). The default setting 

is 0.4 sec. To increase the reactivity of the vario reduce the value of this parameter. For 

a more damped response, increase this value. 

 

5.2.3

 

ANALOGUE VARIO  

ƒ

 

The long data field (highlighted here in red) on the left of the 

Thermal Display page shows the analogue vario value. 

ƒ

 

The analogue vario is an instantaneous vario reading. This 

information is shown on the analogue display on the left of the 

screen by a bar graph, indicating lift or sink. 

ƒ

 

The scale of the analogue vario can be adjusted to suit the 

conditions you are flying in. The default scale is 6m/s. 

ƒ

 

To change the scale of the analogue vario, go to (MAIN SETUP \ n. 

7 FS_V) and change the parameter from the default value “MED” 

(6m/s) to change to “HIGH” (12m/s), for very strong conditions or to “LOW” (1m/s) for 

very weak conditions. 

Содержание Cartesio plus









































































Отзывы: