Digifly Cartesio plus Скачать руководство пользователя страница 53

Страница: 53 / 72

Page 53

FLIGHT RECORDER

When the Digifly instrument is recoding a flight, the record icon in shown at

the bottom of the screen.

If the recorder starts before the “UTC SYNC” had been obtained, it records a flight in

“2D” using the barometric altitude and the “R2d" icon is shown.

While recording in “2D” mode, if a valid GPS position had been obtained, the recorder

starts to record a new flight in “3D” mode and the record icon is at the

bottom of the screen.

In order to respect the FAI rules access to the “MAIN SETUP” menu on the Digifly

instrument is blocked when the flight recorder has been activated.

8.1

ACTIVATING THE FLIGHT RECORDER

The flight data recorder can operate in 3 different modes:

“AUT” Automatic start record mode.

“ALW” Always record mode

“OFF” No data recording.

8.1.1

AUTOMATIC START RECORD MODE

The default record mode is automatic start record mode, “AUT”, parameter (MAIN

SETUP \ n. 22 RECM).

In the automatic start record mode it is possible to change the parameters that initiates

the recording. You can adjust the change of height in meters (MAIN SETUP \ n. 23

R.DS) required for the instrument to automatically start recording a flight

In the automatic start record mode, the flight recorder will start on take off.

The take off is detected when there is a change of height (lift or sink) greater than 2

meters (MAIN SETUP \ n. 23 R.DS) over 4 seconds.

e.g. MAIN SETUP \ n. 23 R.DS = 2 means that a vertical speed (lift or sink) bigger

than 0,5 m/s for at least 4 consecutive seconds is required to recognize a take off (0,5

x 4 = 2).

In order to respect the FAI rules access to the setup menu on the Digifly instrument is

blocked when the flight recorder has been activated.

Once the recorder is activated, the flight recorder will only stop recording when the

instrument is turned off.

Содержание Cartesio plus









































































Результаты поиска

Содержание Cartesio plus

Отзывы:

Похожие инструкции для Cartesio plus

Бренды по названию

Популярные бренды

Digifly Cartesio plus, Руководство пользователя

Результаты поиска

Содержание Cartesio plus

Отзывы:

Похожие инструкции для Cartesio plus

Бренды по названию

Популярные бренды