Digifly Cartesio plus Скачать руководство пользователя страница 65

Страница: 65 / 72

Page 65

10.6

ADVANCED FUNCTIONS

3 adjustable polar curves.

McCready and Equivalent McReady function (with optional air speed probe).

Speed To Fly (with optional air speed probe).

Efficiency related to the air (with optional air speed probe).

Netto Vario (with optional air speed probe).

Thermal sniffer (with optional air speed probe).

Thermal centering function.

Auto zero thermal altimeter.

10.7

GPS FUNCTIONS

Integrated high sensitivity 20 channel SIRF III GPS receiver (Leonardo)

Latitude, Longitude, Altitude GPS, Direction GPS (TRK), Ground Speed GPS.

Wind speed and direction indicator (with GPS).

Efficiency related to the ground (with GPS ground speed).

Direction and distance to the last thermal.

Glide calculator.

Direction, distance and height to the current Waypoint.

Required efficiency to the current Waypoint.

Direction to next Waypoint.

Safe landing glide cone indication.

Multiflight logger 3D recorder (flight data and GPS) with Autostart and Playback.

Data points 100,000 in “2D” mode, and 45,000 in “3D” mode.

From 600 hours with 1 data point per minute to 10 hours with 1 data point per second

250 max flight number.

Compatible with most competition software programs.

Automatic FAI cylinder turnpoint and Start Pylon validation (visual and acoustic).

200 Competition Way 200 User Waypoints

12 Routes with 20 Waypoints on each Route.

10.8

GENERAL SPECIFICATIONS

High resolution graphic LCD display 128 x 64 pixels.

Upgradeable Flash memory software available from the Internet using the optional PC

cable via your PC.

PC connection.

Input for optional air speed probe.

Integrated Bluetooth Module v2.0+EDR - SPP profile (CartesioProBt , LeonardoProBt)

High speed telemetry output (CartesioProBT , LeonardoPro , LeonardoProBT)

Input for external power supply (CartesioProBT , LeonardoPro , LeonardoProBT)

Integrated battery recharger (CartesioProBT , LeonardoPro , LeonardoProBT)

Integrated rechargeable lithium battery (CartesioProBT , LeonardoPro , LeonardoProBT)

Dual Battery System (CartesioProBT, LeonardoPro, LeonardoProBT)

Battery life min 30 + 20 hours / max 200 hours (CartesioProBT , LeonardoPro,

LeonardoProBT).

Battery life 200 hours (CartesioPlus) with High Power AA 1.5V.

Dimensions (H x L x D) 144mm x 72mm x 25mm.

Содержание Cartesio plus









































































Результаты поиска

Содержание Cartesio plus

Отзывы:

Похожие инструкции для Cartesio plus

Бренды по названию

Популярные бренды

Digifly Cartesio plus, Руководство пользователя

Результаты поиска

Содержание Cartesio plus

Отзывы:

Похожие инструкции для Cartesio plus

Бренды по названию

Популярные бренды