Digifly Cartesio plus Скачать руководство пользователя страница 64

Страница: 64 / 72

Page 64

APPENDIX

10.1

DIGIFLY CARTESIO PLUS STANDARD ACCESSORIES

The Digifly Cartesio Plus has the following accessories provided as standard:

Protective case.

Leg strap.

AA 1.5V removable non-rechargeable battery.

10.2

DIGIFLY CARTESIO PRO BT - LEONARDO PRO STANDARD ACCESSORIES

The Digifly Cartesio Pro BT , Leonardo Pro and Leonardo Pro BT models has the

following accessories provided as standard:

Protective case.

Leg strap.

Internal rechargeable lithium battery.

AA 1.5V High Power removable non-rechargeable battery.

Wall adaptor.

10.3

OPTIONAL ACCESSORIES

The following optional accessories are available from Digifly:

Digifly PC serial cable to download flight data and upload new firmware directly from the

Internet.

Digifly PC USB cable to download flight data and upload new firmware directly from the

Internet.

Air speed probe for hang glider.

Air speed probe for paraglider.

Hang gliding vario mount.

Paragliding vario mount.

Digifly 12V plug car recharger cable.

Combined Digifly PC USB cable & 12V plug car recharger cable.

10.4

DIGIFLY TECHNICAL FEATURES

10.5

STANDARD FUNCTIONS

Graphic altimeter.

Altimeters 9,000 m (29527 ft).

Super fast vario with dynamic filter ‘IntelliVario .

Acoustic vario with adjustable levels, volume and tone.

Analogue vario +/- 24 m/s (4800 ft/min).

Digital vario +/- 25 m/s (5000 ft/min).

Vario integrator adjustable from 0 to 60 sec.

Total energy compensation (with optional air speed probe).

Input for optional air speed probe 150 km/h (93 mph) with user calibration.

Adjustable stall alarm acoustic (with optional air speed probe).

Barometer (range 300 to 1200 mB) with user calibration.

Thermometer (range -30°C to +70°C) (range -22 °F to +158 °F).

Constant battery monitoring.

Date and time with GPS synchro, chronometer, flight timer.

Adjustable units of measure.

8 Language for help setup

Содержание Cartesio plus









































































Результаты поиска

Содержание Cartesio plus

Отзывы:

Похожие инструкции для Cartesio plus

Бренды по названию

Популярные бренды

Digifly Cartesio plus, Руководство пользователя

Результаты поиска

Содержание Cartesio plus

Отзывы:

Похожие инструкции для Cartesio plus

Бренды по названию

Популярные бренды