Digifly Cartesio plus Скачать руководство пользователя страница 62

Страница: 62 / 72

Page 62

9.6

TELEMETRY OUTPUT

The Leonardo Pro BT has a high speed (10 times per second) telemetry output. This is a

new very powerful function that sends your flight information in "real time" to external

equipment e.g. PDA , Palm, Pocket PC or your even to your mobile phone by Bluetooth

or a serial/ USB cable. Data can be sent to external equipment e.g. for car navigation,

remote tracking of pilots, SMS alarm messages for "search & rescue", CompeGPS for

Pocket PC, mobile phones and many flight programs running on Palm, Pocket PC and

Cellphone (available free on the internet).

External equipment can be connected to the “GPS” socket on the base of the Digifly

instrument in order to receive the telemetry data output.

To enable telemetry output, go to (ADVANCED SETUP \ n. 6 TELE) and select the correct

data output format (for more information read the related protocol documentation on

our web site www.digifly.com)

9.6.1

BLUETOOTH TELEMETRY OUTPUT

To send telemetry data output via the integrated Bluetooth

module (Cartesio Pro Bt and Leonardo Pro Bt models only)

go to (ADVANCED SETUP \ n. 20 BLUT) and select "ON" .

Please refer to the Bluetooth connection setup instructions in

the documentation that comes with your PDA, Smartphone or Laptop. You will need to

set up a Serial Port connection (SPP) between the Digifly instrument and your device ,

make sure you also select the correct COM port number.

The Digifly instrument will appear to your device as the " Digifly Cartesio Pro BT" or the

"Digifly Leonardo Pro BT" and its telemetry data will be output on its serial output..

To ensure ease of use , create a "pairing" between your device and your Digifly

instrument . The "pairing" code is 0000.

In the Bluetooth connection property of your device "authorize" the connection with the

Digifly instrument so for further use it will be automatically connect (it will not need to

be "paired" again).

When the Bluetooth connection is established the Bluetooth icon in the status bar of

the Digifly instrument is on and is not blinking.

Содержание Cartesio plus









































































Результаты поиска

Содержание Cartesio plus

Отзывы:

Похожие инструкции для Cartesio plus

Бренды по названию

Популярные бренды

Digifly Cartesio plus, Руководство пользователя

Результаты поиска

Содержание Cartesio plus

Отзывы:

Похожие инструкции для Cartesio plus

Бренды по названию

Популярные бренды