Digifly Cartesio plus Скачать руководство пользователя страница 56

Страница: 56 / 72

Page 56

PC CONNECTION AND INTERFACE

To download your flight data to your PC, plug the optional PC

serial or USB cable into the middle socket on the base of your

Digifly instrument.

9.1

COMPETITION SOFTWARE COMPATIBILITY

The Digifly instrument instruments can communicate via a direct cable connection with

some of the commonly used competition software packages e.g. CompeGPS,

MaxPunkte, GpsDump, CheckIn-PWC.

With these programs is possible to upload competitions Waypoints, download flight

tracks in IGC format with competition validation and to add automatically the digital

signature required for the On Line Contest (OLC).

The Digifly VLtools2008 software and the CompeGPS, MaxPunkte, GpsDump, CheckIn-

PWC software have two different and completely independent ways to connect to the

instrument:

To communicate with a PC connect the optional PC serial cable or USB cable in to the

left socket on the bottom of the vario, marked GPS.

9.2

CONNECTING WITH COMPEGPS, MAXPUNKTE, GPSDUMP, CHECKIN (PWC) SOFTWARE

9.2.1

UPLOADING COMPETITION WAYPOINTS

To upload competition Waypoints from your PC to the Digifly instrument , install on your

PC one of the following software packages (CompeGPS, MaxPunkte, GpsDump,

CheckIn-PWC).

Select the correct COM port and set up the communications protocol to MLR 38400

baud.

Turn on the Digifly instrument and navigate to the “MENU” screen. With the up and

down keys, highlight the “WPT COMP” menu, without entering it.

From your PC software (CompeGPS, MaxPunkte, GpsDump, CheckIn-PWC) select “send

Waypoints to the gps”.

Note that this procedure will automatically erase all old competition Waypoints and the

old Competition Route (Rt 1 Comp).

Содержание Cartesio plus









































































Результаты поиска

Содержание Cartesio plus

Отзывы:

Похожие инструкции для Cartesio plus

Бренды по названию

Популярные бренды

Digifly Cartesio plus, Руководство пользователя

Результаты поиска

Содержание Cartesio plus

Отзывы:

Похожие инструкции для Cartesio plus

Бренды по названию

Популярные бренды