Digidim Helvar 924 Скачать руководство пользователя

Страница: 7 / 58

Helvar 924 LCD TouchPanel: Installation and User Guide

Doc. 7860137,

issue 6, 2014-08-28

Press

2.3 Accessing Configuration menus

Press the Hotspot in the lower-right corner of the

screen for at least four seconds.

Type in the password and press

To learn about password protection, see

Section 15.

When you have entered a valid password, features protected by the password can be used until the password expires. The

password expires if you return to a Screen, and do not return to the Configuration menus within 20 seconds. After this

time, if you want to access the Configuration menus, you must enter the password again. This ensures that TouchPanel’s

Configuration menus are protected automatically from accidental or unauthorized access.

2.4 Exiting from Configuration menus

Press

The Main Menu will appear.

repeatedly until the required screen or menu appears. You may also need to exit from any configuration

mode you are in, such as Move mode or Properties mode.

Wait 20 seconds. When this time has elapsed, the password will expire and TouchPanel is secure. You must type in the

password again to access the Configuration menus.

Содержание Helvar 924



























































Результаты поиска

Содержание Helvar 924

Отзывы:

Похожие инструкции для Helvar 924

Бренды по названию

Популярные бренды

Digidim Helvar 924, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Helvar 924

Отзывы:

Похожие инструкции для Helvar 924

Бренды по названию

Популярные бренды