![Digidim Helvar 924 Скачать руководство пользователя страница 41](http://html.mh-extra.com/html/digidim/helvar-924/helvar-924_installation-and-user-manual_2497186041.webp)
39 Helvar 924 LCD TouchPanel: Installation and User Guide
Doc. 7860137,
issue 6, 2014-08-28
12. Backing Up And Restoring
All information stored in TouchPanel can be backed up to a computer, via a USB connection. Backed up information can
also be restored, to the same TouchPanel or others, by the same means.
To use TouchPanel Backup you will need a computer with a USB port to connect the computer to TouchPanel. A suitable
USB cable is included with TouchPanel.
Backup and restore is available if your TouchPanel is using software version 3.5.1 or later. You can check the
version of software via the About screen. To learn more, see section 20.2.
12.1 Preparing your computer for use with TouchPanel Backup Software
1. Install the software from the CD supplied with your TouchPanel.
2. Before connecting the USB cable between the computer and TouchPanel:
•
If the computer is a laptop or notebook, it must be removed from any docking station
•
Remove any USB port expanders
•
Remove the computer from any attached network connection
3. Power up the TouchPanel and wait for the start screen to be replaced by the initial user screen.
4. Connect the USB cable between the computer and TouchPanel as detailed in step 12.2. Follow the instructions that
appear on the computer screen.
Note: the warning about Microsoft’s own drivers not being verified compatible with Windows itself is to be
expected, and can be ignored by selecting ‘Continue Anyway’.
5. Once the device driver installation has been successfully completed, the computer is ready for use with the TouchPanel
backup software.