Digicare Biomedical Technology
Operators Manual Multi-parameter Patient Monitor " LifeWindow Lite LW8 "
9
• To admit a patient, touch on the “Admit New Patient” button.
• Enter the Patient’s Name and Patient Control ID.
• Touch the “Admit Patient & Start Monitoring” button.
• If less then 5 minutes of monitoring occurred, the Patient is admitted and the screen is closed.
• If more then 5 minutes of data is available, you need to choose what to do with the with the
patient’s data in the buffer, with three options:
• “Keep for the new patient”. Touch to include data to new patient.
• “Save as different patient”. Touch to save data to different patient.
• “Discard Data”. Touch to discard.
E. DATE AND TIME
• Check if the current “Date and Time” displayed in the Indicator (47) are correct.
• To change the Date and Time, touch the “SYSTEM” menu and touch “Date/Time Settings”.
• Set current location “Date and Time”. Touch OK to finish.
F. MONITORING SCREEN
• The LifeWindow™ Lite LW8 monitoring screen is pre-configured accordingly to the Vital Signs
parameters that are installed and turned-on. The traces are pre-configured to keep “In-line
Logic” with the Indicators area in the right of the traces area.
• To turn-off any Vital Sign that is not going to be used in patient’s monitoring, touch the Vital
Sign menu and touch ECG OFF or SPO2 OFF, etc. The monitoring screen may change some
Traces settings and Indicators.
• Factory Default Settings are configured to standard applications. As the user changes Alarm
Limits and other settings, the LifeWindow™ Lite LW8 will save the changes when turned-off.
Next time the unit is turned-on, the last saved settings will remain.
• To return the unit to the Factory Defaults, touch in the “System” menu and touch in “Load
Factory Default Settings”.
G. TRACES SETTING
• The LifeWindow™ Lite LW8 six traces are configured and cascaded accordingly to the Vital
Signs parameters installed and turned-on.
• You can select any physiological waveform from one to six of the available traces. You can
also cascade the traces up to 3 individual loops.
• Move the Pointer to TRACES icon and press the Select pushbutton.
• Select TRACE waveform source (ECG, SpO2 Plethysmogram, Capnogram, or No Selection).
• Select TRACE sweep speed (6.25mm/s, 12.5mm/s, 25mm/s, 50mm/s or 100mm/s).
• Select TRACE color.
• Select TRACE style (Thin line or Fill In).
• Press the Cascade Traces button if you want to cascade two or more traces.
• You can create until 3 cascade loops: Loop 1, Loop 2 and Loop 3. Select the Loop
waveform Source. Select the Sweep Speed, Color and Style for each trace.
• Press the Done button to finish.
• Note: When the LifeWindow™ Lite LW8 is turned-off and turned back on, the traces will return
to the original pre-configuration accordingly to the physiological parameters that are installed
and turned-on, to keep “In-line Logic” with the Indicators area in the right of the traces area.
H. PATIENT TYPE
• Patient Type has two modes: Adults and Neonatal. It affects the ECG and NIBP functions only.
All other Vital Signs functions are not affected by the Patient Type selected.
Содержание LifeWindow Lite LW8
Страница 1: ......
