DigiCare DigiPump LP8, Руководство оператора

Страница: 11 / 29

Operator’s Manual DigiPump LP8 Infusion Pump - Digicare Biomedical Technology Inc.
- 9 -
Receptacle
Chapter II. Installation
2.1 Packing list
When opening the package, verify that the items below are enclosed:
1) Infusion pump ……………1
2) Drop detector ………… ……1
3) Knob bolt …………… …… 1
4) Power cord…………… ……1
5) Operator Manual……………1
2.2 Installation
2.2.1 Set the knob bolt firmly
Attach the knob bolt to the pole holder located on the rear of the pump.
2.2.2 Set drop detector
1) As showed in the picture on the right, insert drop
detector plug in the receptacle at the rear panel.
Note: If the drop detector is not well connected,
the display will show “ ”.
2) When the drop detector is not in use, it shall stay on
the position showed in the picture.
Chapter III. Basic Operation
3.1 Preparation
The battery should be charged before using the pump for the first time or if it has been stored for a
long time.
1. Connect the power cord to AC power receptacle;
The place where the
drop detector is kept
Knob bolt