Digi DC-530 Скачать руководство пользователя страница 44

Страница: 44 / 62

DC-530 Operation Manual

2. Enter the three digit Item Code for an item you have previously programmed into the DC-530’s item

memory and press the

key. The scale will recall the Unit Weight and Tare Weight (if any) previously

programmed for ths item.

3. Place the container, box, or item to be tared on the scale platform and press the

TARE

key. The weight

display will now show

and the Net and Zero indicator lamps will illuminate.

4. Press the

UNIT WEIGHT

key. The screen will flash red and then indicate that the Item Code you have

entered already exists in memory.

After a moment, the screen will ask you to confirm that you want to update the data for this existing Item

Number.

5. To exit back to the Item Registration screen without updating the Tare Weight of the existing Item Code,

press

. To change the Tare Weight associated with this Item Code from the weight previously

programmed in memory to the new Tare Weight from the platform, press

. The scale will confirm that

it is updating before returning you to whichever Counting Mode screen you began at, either Normal

Counting Mode or TEP Mode.

6.2.3

Update an Existing Item From the Programming Mode

1. From the Counting Mode screen (either Normal Counting Mode or TEP Mode) press the

MODE

key to

move to the Mode Menu.

2. In the Mode Menu Screen, press the

key to enter the Item Programming Mode. The upper right hand

part of this screen will show much of the 200 item memory is currently programmed. In the example

All manuals and user guides at all-guides.com

Содержание DC-530































































Результаты поиска

Содержание DC-530

Отзывы:

Похожие инструкции для DC-530

Бренды по названию

Популярные бренды

Digi DC-530, Руководство по эксплуатации

Результаты поиска

Содержание DC-530

Отзывы:

Похожие инструкции для DC-530

Бренды по названию

Популярные бренды