Digi DC-530 Скачать руководство пользователя страница 38

Страница: 38 / 62

DC-530 Operation Manual

without error.

2. Press the

REZERO

key to zero the scale.

3. Place on the platter a quantity of parts to be counted.
4. If the quantity is less than the accuracy limit, the scale will display the count of the number of pieces and

reduce the maximum limit to how many more can be counted under the limit.

Add pieces up until the quantity limit is reached, then remove the parts from the platter and begin

counting again.

5. If the quantity you place on the platter exceeds the maximum safety quantity by 1-9 pieces, the display

will show the total count but will change to yellow. If you have exceeded the maximum safety quantity

by more than nine pieces, the display will turn red. In both cases the Limit field will go blank to indicate

that no more pieces can be added without error.

Remove pieces from the platter until you are at or below the maximum safety quantity again. When the

scale is stable, the Limit field on the display will reset back to the maximum safe quantity and the

characters will change back to white.

6. When done counting this part, remove all weight from the platter and press the

C (Clear)

key to clear the

Unit Weight.

5.6.4

TEP Mode - Part Accumulation and Part Subtraction

Part accumulation and part subtraction in TEP Mode follow the same procedures as in Normal Counting Mode.

Please see Section 5.5.3

All manuals and user guides at all-guides.com

Содержание DC-530































































Результаты поиска

Содержание DC-530

Отзывы:

Похожие инструкции для DC-530

Бренды по названию

Популярные бренды

Digi DC-530, Руководство по эксплуатации

Результаты поиска

Содержание DC-530

Отзывы:

Похожие инструкции для DC-530

Бренды по названию

Популярные бренды