Digi DC-530 Скачать руководство пользователя страница 40

Страница: 40 / 62

DC-530 Operation Manual

5.9

Sample, Count and Print a Label

NOTE

: For this function to be used on the DC-530, an external printer must be connected to the scale. For more information on

how to connect an external printer, see Section 7.1.

1. Press the

REZERO

key to zero the scale.

2. Place the empty bin on the scale and press the

TARE

key.

3. Place a 10 piece sample of the item in the bin and press the

PCS

key. (For maximum accuracy, count

the 10 piece sample into your hand and then add the entire sample to the bin at one time, instead of

adding them one or two at a time.) If 10 pieces are not enough for the scale to get an accurate sample, the

scale will prompt you to add a specific additional number of pieces. Add these pieces and press the

PCS

key again.

4. Add the remaining pieces to be counted into the bin.
5. Press the

* PRINT

key. The scale will print a label in the default label format.

Figure 5-3. Weight Label Without Entering or Recalling an Item Code

5.10 Scan ID Bar Code, Count and Print a Label

NOTE

: For this function to be used on the DC-530, an external printer and a barcode scanner must be connected to the scale.

For more information on how to connect an external printer, see Section 7.1 . For information on connecting a barcode scanner,
see Section 7.5.

1. Enter the ID Code by scanning the ID Bar Code.
1. Press the

REZERO

key to zero the scale.

2. Place the container of the product on the scale platter.
3. Press the

* PRINT

key. The scale will print a label in the default label format.

Figure 5-4. Weight Label with Item Code

All manuals and user guides at all-guides.com

Содержание DC-530































































Результаты поиска

Содержание DC-530

Отзывы:

Похожие инструкции для DC-530

Бренды по названию

Популярные бренды

Digi DC-530, Руководство по эксплуатации

Результаты поиска

Содержание DC-530

Отзывы:

Похожие инструкции для DC-530

Бренды по названию

Популярные бренды