Digi DC-530 Скачать руководство пользователя страница 39

Страница: 39 / 62

Scale Operations

5.6.5

TEP Mode - Negative Counting

Negative Counting in TEP Mode follows the same procedure as in Normal Counting Mode but you must first

establish a Unit Weight by sampling in the TEP Mode. For more information on establishing TEP unit weights,

please see Section 5.6.1. For information on negative counting procedures, please see Section 5.5.6

5.6.6

TEP Mode - Clearing Accumulated Data

To clear accumulated data, press the

* PRINT

key.

5.7

Toggle Between Scales

The external scale option for the DC-530 Counting Scale can be ordered by ordering Part #94911 at the time you

purchase your scale. To toggle between Scales 1 and 2, press the

SCALE

key. The display will show the

platform being used for weighing. Only scales present will be selected (i.e. A two-scale system switches

between Scale A and Scale B only.) If no external scales are connected, this function will not work. If you press

the

SCALE

key when no other scale is connected, the error message

NO SCALE CHANGED

will appear.

5.8

Recalling Item Codes in Counting Mode

The DC-530’s 200 item memory allows you to store the Unit Weight, Tare Weight, preferred Scale, and

Setpoints for up to 200 Item Codes for quick retrieval. This greatly speeds your weighing and counting

operations.

1. Enter the three digit Item Code number using the numeric keypad and press the

# [CODE]

key to call

up the data.

2. If an Item Code is entered which is not stored in memory, the scale will beep and display the error

message

ITEM NOT FOUND

at the bottom of the screen. Enter a different three digit Item Code.

If you are in TEP Counting Mode, you can only recall an Item Code which has had the Safety Quantity

Limit calculated. If you enter an Item Code for which the Safety Quantity Limit has not yet been

calculated, the following error message will appear.

You must enter the TEP Mode, perform a TEP sampling process to establish a Unit Weight and Safe

Quantity Limit (see Section 5.6.1), and then save the Item Code in memory.
If an item code existing in memory is entered, the stored settings will be displayed after the

# [CODE]

key is pressed.

You can now begin to carry out weighing and counting operations.

3. To clear the recalled Item Code and its data, remove all weight from the platform and press the

C (Clear)

key.

All manuals and user guides at all-guides.com

Содержание DC-530































































Результаты поиска

Содержание DC-530

Отзывы:

Похожие инструкции для DC-530

Бренды по названию

Популярные бренды

Digi DC-530, Руководство по эксплуатации

Результаты поиска

Содержание DC-530

Отзывы:

Похожие инструкции для DC-530

Бренды по названию

Популярные бренды