manualshive.com logo in svg

Dieta S-CLASSIC, Руководство пользователя, Страница: 30 / 35

Поделиться
Скачать
Dieta S-CLASSIC Скачать руководство пользователя страница 30

DIETA SOUPPER / S-CLASSIC  user manual 1/2018 • Page EN-27

You can also wash the kettle with the optional washing tool.

Tilt the kettle and remove all the easily removable food from the kettle with a rubber 
spatula. Lock the washing tool to the kettle by the instructions given on page 16. Tilt 
the kettle to up position.

Add little bit of water to the kettle and add some foam producing mild detergent into 
the kettle. 

Estimated water volume needed: 
40...80L kettle about 10 liters,
100 ...200L kettle about 20 liters
300...470L kettle about 30 liters.
The less water used, the better. 

Set the kettle heating to 40°C and put the mixer on with the lowest speed. Slowly 
increase the speed of the mixer until the foam almost reaches the rim. Leave this 
mixing speed on for a while. When the kettle part is cleaned, stop the mixer, tilt the 
kettle and rinse.

If needed, dry the kettle with a rubber spatula or a cloth. Tilt the kettle to up position 
and when the kettle is dry, close the lid.

Keskiputken harjalla varustettu pesutyökalu (lisävaruste)

Kettle part - washing with washing tool (option)

Содержание S-CLASSIC




































Отзывы:

Нет отзывов