Dieta S-CLASSIC Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 35

Dieta S-CLASSIC Скачать руководство пользователя страница 12

DIETA SOUPPER / S-CLASSIC user manual 1/2018 • Page EN-9

USING THE KETTLE

Note!

Do not use the service switch
or the red emergency switch
to turn on or off the kettle.
The emergency switch is only
for emergencies!

Water requirements

Turning on the kettle

Turning off the kettle

Used water must be clean. If water has a lot of organic particles,
iron etc. it has to be filtered. If hardness is more than 4°dH,
the kettle needs a soft water connection - or the kettle may be
equipped with a built-in water softener filter.
You may only use cold or hot (over 65°C) water for cooking.
Water flow depens on the water pressure. With dynamic pressure
3,8 bar the flow is approximately 25 liters per minute.

You can turn on the kettle by pressing the black 0/I button
on frontside of the kettle leg. The display and the kettle
will turn on.

Stop all programs. Turn off the kettle by using the black
0/I button on frontside of the kettle leg.

«
...
10
11
12
13
14
...
»

Содержание S-CLASSIC




































Отзывы:

Нет отзывов