Dieta S-CLASSIC Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 35

Dieta S-CLASSIC Скачать руководство пользователя страница 11

DIETA SOUPPER / S-CLASSIC user manual 1/2018 • Page EN-8

• Control used when optional food temperature control

is not installed

• The temperature is controlled with jacket

temperature, temperature can be set to 0…125°C

• Temperature display shows jacket temperature

• Optional food temperature control is installed.
• The temperature is controlled with food temperature,

temperature can be set to: 0…125°C

• Temperature display shows food temperature

Classic display

WATER-button
Used to fill the kettle with water. Stop by pressing the
button again.

TIMER-button
Used to set the timer.
Stop by pressing the button again.

PROG-button
Used to read, add or remove programs. Stop by
pressing the STOP-button.

COOK-button
Used to start cooking. Stop by pressing the STOP-
button.

STOP-button
Used to stop all functions.

TILT-button
Used to tilt the kettle back to the up position
Stop by releasing the button.

TILT-button
Used to tilt the kettle to horizontal position.
Stop by releasing the button.

Jacket temperature control

Food temperature control

«
...
9
10
11
12
13
...
»

Содержание S-CLASSIC




































Отзывы:

Нет отзывов