Dieta S-CLASSIC, Руководство пользователя, Страница: 24 / 35

DIETA SOUPPER / S-CLASSIC user manual 1/2018 • Page EN-21
Pic 1
Pic 2
Pic 3
Note!
Never lift the tool assembly so that both handles
are at up-position and the tools are on their place.
If both handles are up, the tools may drop and
scratch the kettle surface
Locking the tool
1. When placing the tools to the center pillar, both of
the center pillar handles should be lifted up. (Pic 1)
2. Place the tools to the center pillar and lock them
by turning the smaller handle to horizontal position.
Make sure the tools are locked properly. (Pic 2)
3. When the tools are properly locked, lock the
center pillar by turning also the bigger handle to
horizontal position. (Pic 3)
You may also lift the tools as an assembly to the
kettle. If done this way, it is very important that the
assembly is lifted only from the bigger handle. The
smaller handle needs to be horizontal.
When the tool assembly is on its place, lock it by
placing also the bigger handle horizontal.
Removing the tool
To remove tools as an assembly. Lift only from
the bigger handle. Make sure the smaller handle
is horizontal. Be careful not to scratch the kettle
surface with the tools.
Remove the tools separately: lift both handles up.
Then carefully remove the tools and then the center
pillar.
Washing the tool
The tool can be washed by hand or in a dishwasher. The tool
assembly should be disassembled before washing.
The scrapers don’t have to be removed for washing.
The smaller kettle tools (up to 200L) also fit to the
dishwasher rack when disassembled.