Dieta S-CLASSIC, Руководство пользователя, Страница: 26 / 35

DIETA SOUPPER / S-CLASSIC user manual 1/2018 • Page EN-23
The indicator light will start flashing
when the program needs additional
settings
Heating
•
Choose the temperature with the [+] and [-] buttons under the
COOK- button
Water filling
• Set the amount of water with the [+] and [-] buttons under the
COOK-button
Chilling (CH2 / CH3)
•
Choose the temperature with the [+] and [-] buttons under the
COOK-button
Mixing
• Choose the mixing program and then the speed with the [+] and [-]
buttons under the mixer button
Programs and programming
All kettle models have programs and programming as
a standard. The memory has space for 100 programs.
Programs have numbers from 1 until 100. The user has
to keep a separate list of the programs.
Program button
PROG-button has three functions. Pressing the button
1-3 times, will show all the options:
rEAd
Read program from the memory
Add
Make a new program
dELETE
Remove a program from the memory
Read program from the memory
1. Press once the PROG-button (display shows
rEAd
).
2. Choose the program number with [+] and [–] under the
COOK-button.
ProG ???
will appear if there are no
programs in kettle memory.
3. If you want to use timer, press the TIMER-button. Set
the time to start with the [+] and [–] buttons under the
COOK-button. Set the timer by pressing the TIMER-
button again.
4. Press PROG-button again to start the program. The
program will also start immediately, if the timer has not
been selected.
Make a new program
Make a program and save it to memory.
1. Press twice the PROG-button.(display shows
Add
)
2. Select a number for the program. Pressing the [+] button
under the COOK-button, will show the first available
program number. Pressing the [–] button under the COOK-
button, will show the last available program number.
You can browse the available numbers with the [+] and
[–] buttons under the COOK-button. Select the program
number by pressing the PROG-button.
3. Choose the desired functions by pressing the buttons.
You may choose any function or combination of
functions.
(NOTE! The chilling is choosable only in CH2
or CH3 chilling. If you choose both cooking and chilling,
the kettle thinks it is a Cook-Chill program where first is
cooking phase, then chilling phase.)
Remember to choose the additional settings for each
function (e.g heating temperature)
4. After you have selected all the functions and made the
additional settings, press the TIMER-button. Now you
have to set the cooking time, which starts to run after the
set temperature is reached. Set the time with the [+] and
[–] buttons under the COOK-button.
5. Press the PROG- button. The program will be saved and it
will also start immediately.