Dieta S-CLASSIC Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 35

Dieta S-CLASSIC Скачать руководство пользователя страница 16

DIETA SOUPPER / S-CLASSIC user manual 1/2018 • Page EN-13

Set temperature

Heating with food temperature control

Stopping the heating program

The heating program can be stopped by pressing
the COOK-button, the indicator light will turn off.
Pressing the STOP-button, will shut down all the
used programs (heating, chilling and mixing).

The heating starts by pressing the COOK-button.
You can set the desired food temperature by pressing
the [+] / [–] buttons under the COOK-button.
The set temperature shows in the upper right corner
of the display for couple of seconds and after that the
display shows the current food temperature.
You can change the temperature by pressing the
[+] / [–] buttons.

Proving

If the set temperature is max. 39°C, the kettle
automatically sets the max. jacket temperature to 46°C, to
prevent yeast from dying.

Gentle cooking / burn prevention

If the set temperature is 40 ... 92°C, the kettle
automatically sets the max jacket temperature to
105 °C to prevent the food from burning. This program
is recommended to milk based sauces and soups.

Power cooking/ No burn prevention

If the set temperature is 93 ... 99°C, the kettle heats
up the food as quickly as possible and automatically
sets the max. jacket temperature to 105...111°C,
depending on the set temperature. This program
is recommended for boiling potatoes or reducing
sauces.

«
...
14
15
16
17
18
...
»

Содержание S-CLASSIC




































Отзывы:

Нет отзывов