• The Minicard Binary Utility program allows you to upgrade the
application software on your Walkabout Express digital portable.
• You may use another utility program to set the polling interval used by
your PC to check if an M card is in the M Card Reader.
System Requirements
Before you begin the setup steps, make sure your PC meets the following
minimum system requirements to support Voicedata M Card Reader and File
Transfer operations.
✐
Note:
To avoid compatibility problems with the Voicedata M Card Reader,
you should not have a removable disk drive device (e.g., an Iomega Zip®
Drive) attached to your PC.
Hardware:
• Multimedia Pentium PC running at 166 MHz or higher required,
Pentium II processor or higher recommended.
• 32 MB of RAM required, 64 MB recommended.
• 40 MB of available hard disk space minimum. 200 MB or higher
recommended for temporary storage of voice files.
• CD-ROM drive.
• VGA monitor adapter or higher.
• Dedicated Parallel Port configured for EPP mode recommended, Standard
or Compatible mode required (for Voicedata Drive).
• Microsoft™ Mouse or compatible pointing device.
• Network Adapter card or modem (to upload files onto a network device).
Software:
• Microsoft™ Windows™ 95, 98, or Windows NT 4.0 Workstation Service
Pack 4 or higher.
• Windows Multimedia component installed.
2
Over
view
