Installing the Voicedata M Card Reader
Set up the M Card Reader to work with your PC as follows:
1
Shut down your PC.
2
If you are using a local printer attached directly to your PC and the PC
only has one parallel port (LPT1), shut down the printer and disconnect it
from the parallel port.
3
If you are using a local printer and your PC has two parallel ports, the
printer cable must be connected to the LPT2 port.
4
Connect the Voicedata M Card Reader cable to the LPT1 parallel port on
your PC, as shown.
✐
Note:
The M Card Reader should be the only device connected to the
LPT1 port. Use the LPT2 port for all other devices.
4
Installing the V
oicedata M Car
d Reader
Voicedata M Card Reader Cable Connections
PC
LPT1 Port
Voicedata M Card
Reader Cable
AC Power
Adapter
Voicedata M Card Reader
