Saturn User Manual V1
Page 36
10.3 Installing OS and Booting
Ensure that SATA data cable and power cable are connected to SATA HDD. Follow below steps to install Windows
10 operating system in SATA HDD.
Connect a USB pen drive to a USB port of (J15/J16) Saturn board having Windows 10 installation image.
Boot the Saturn board to BIOS. The SATA HDD and USB device should be detected in BIOS under boot
devices.
Under boot priorities, set highest priority for USB.
Save BIOS settings and restart.
Windows 10 installer would start running. Follow the instructions in the installer.
Upon successful installation, boot to Windows 10 and install the necessary drivers.