Saturn User Manual V1
Page 22
6.1.8
SATA (J6)
The board provides access to SATA interface through a standard 7-pin connector. The pinout of this connector is
as below:
1
Ground
2
SATA TX+
3
SATA TX-
4
Ground
5
SATA RX-
6
SATA RX+
7
Ground
Connector Type: 7-position vertical through connector, Molex# 0678008025.
Mating Cable: Standard HDMI cable
6.1.9
Audio (J5)
The board provides access to HDA interface on q 10 pin connector. The pinout is shown below:
LineOut-L
A01
B01
LineOut-R
GND_Audio
A02
B02
GND_Audio
LineIn-L
A03
B03
LineIn-R
GND_Audio
A04
B04
GND_Audio
NC
A05
B05
MIC_IN
Connector Type: 2x5 2mm pitch latching RA TH header of Amphenol# 98464-G61-10ULF
Mating Cable: DSC no. 6980608
6.1.10 LVDS LCD (J2)
The board provides access to an LVDS LCD display on a 30-pin connector. The LCD panel power is jumper-
selectable for 3.3V (default) or 5V
VDD 5V/3.3V
1
2
VDD 5V/3.3V
VDD 5V/3.3V
3
4
VDD 5V/3.3V
CLK+ Odd
5
6
CLK+ Even
CLK- Odd
7
8
CLK-Even
Ground
9
10
Ground
D0+ Odd
11
12
D0+ Even
D0- Odd
13
14
D0- Even
D1+ Odd
15
16
D1+ Even
D1- Odd
17
18
D1- Even
D2+ Odd
19
20
D2+ Even
D2- Odd
21
22
D2- Even
D3+ Odd
23
24
D3+ Even
D3- Odd
25
26
D3- Even
Ground
27
28
Ground
DDC CLK
29
30
DDC DATA
Connector Type: 2x15 1mm pitch RA SMT shrouded header of Molex# 5015713007.
Mating cable: Custom cable depending upon the target display. The LCD end of the cable will be different for each
LCD or LCD family. Because of the wide variety of LCDs and the fact that many applications do not require a
display, this cable is not included in the Saturn standard cable kit CK-SAT-01. DSC cable no. 6981213 may be used
as the starting point for this cable, with the LCD end to be modified by the customer as per the LCD requirements.
If Single channel LCD is used, use the Odd channel signals and leave the Even channel signals unconnected.
