Dialogic® Vision™ CX Video Gateway Administration Manual
Managing the CX Video Gateway
Defining video transcoder resources for the CX Video Gateway
This procedure applies to a CX Video Gateway that is mated with one or more video
transcoder systems, which may be external or co-located.
To define video transcoder resources for a CX Video Gateway, follow these steps:
Step
Action
1
Access the Vision™ Console for your CX Video Gateway, as described in
Accessing the Vision
Console
on page 33.
2
Click
Resources
on the Configuration menu, and the Resource Configuration page is displayed.
•
In the Global resources group, enable video transcoding. This global flag indicates whether
video transcoder resources are available for the CX Video Gateway.
•
Click
Submit
to apply the change.
3
Click
Services
on the Operations menu. On the Services page, start or restart the Call Server
service to apply the new configuration.
4
Click
Video transcoder resources
on the Provisioning menu, and the Video transcoder
resource configuration page is displayed.
•
Specify the IP address of a video transcoder system to be attached to the CX Video
Gateway and click
Add video transcoder
. The IP address is listed in the table as well as
the system name and number of channels. The CX Video Gateway determines if video
transcoder services are running on that system and displays a message accordingly.
•
Specify the IP address of each additional video transcoder system to be deployed, if any,
and click
Add video transcoder
.
•
To remove a video transcoder system, click
Remove
.
•
Click
Submit
to apply the changes.
After you have updated values on the Provisioning menu, you do not have to restart the Call
Server service to apply the new configuration.
Dialogic
95
