Dialogic® Vision™ CX Video Gateway Administration Manual
Vision™ Console parameters
Trunks
The Trunks page configures trunk settings and circuit groups. Access this page by
clicking
Trunks
on the Configuration menu.
Group
Associated
Parameter
Description
implementations
Frame type
Indicates frame type of T1 or E1.
CRC signal
checking
Indicates whether the media resource
provides CRC signal checking.
Trunk
configuration
All
Line
impedance
Type of cable connecting the media
resource to the T1 or E1 network.
Trunk
framing
Framing format.
Line code
Ones density maintenance method
used on the trunk line to maintain a
clear channel transmission.
Clock source
Media board's clock source.
•
Network: source is from the
PSTN.
•
Internal: source is from the
internal oscillator.
PSTN routes
All
Route 1 -
Route
n
Defines the route circuits reserved for
outgoing PSTN calls, and specifies
how the circuits are selected.
For a description of the valid values,
see
Values for the PSTN routes group
on page 45.
Click
Add
to reserve another route
circuit for outgoing PSTN calls.
Board #0
trunks
All
Trunk 1 -
Trunk
n
Indicates whether the specified trunk
on Board 0 is enabled or disabled, and
specifies the PSTN route associated
with the trunk.
Trunk 1 -
Trunk
n
Indicates whether the specified trunk
on Board 1 is enabled or disabled, and
specifies the PSTN route associated
with the trunk.
Board #1
trunks
Implementations where the
gateway has two media
boards
Trunk 1 -
Trunk
n
Indicates whether the specified trunk
on Board 2 is enabled or disabled, and
specifies the PSTN route associated
with the trunk.
Board #2
trunks
Implementations where the
gateway has three media
boards
Values for the PSTN routes group
Use a circuit code identifier (CCI) to identify a PSTN route. A CCI is an integer
ranging from 1 to the highest circuit (CCI max). For example, if the routes contain
four E1 trunks (each containing 30 circuits), circuits are numbered from 1 to 120.
The value of CCI max is 120.
Dialogic
45
