background image

 

Table Of Contents 

Chapter 1:

 

Introduction .................................................................................9

 

Chapter 2:

 

Overview of the CX Video Gateway.............................................11

 

CX Video Gateway overview.........................................................................11

 

Signaling protocols and models..................................................................12

 

Media capabilities ....................................................................................13

 

CCXML scripting engine ............................................................................13

 

SNMP agent and subagents.......................................................................14

 

Fast call setup.........................................................................................14

 

ISDN models .............................................................................................15

 

ISDN audio model ...................................................................................15

 

ISDN video model....................................................................................15

 

ISUP models..............................................................................................16

 

Basic ISUP audio model ............................................................................16

 

Basic ISUP video model ............................................................................17

 

ISUP scalable deployment model ...............................................................18

 

ISUP redundant deployment model ............................................................19

 

Models with Video Transcoders.....................................................................20

 

Video Transcoder interconnect...................................................................20

 

Video model with a single Video Transcoder ................................................20

 

Video model with multiple Video Transcoders...............................................21

 

Video model with gateways sharing Video Transcoders..................................21

 

Video model with co-located Video Transcoder.............................................21

 

Standards .................................................................................................22

 

Document conventions................................................................................23

 

Related documentation ...............................................................................24

 

Chapter 3:

 

Configuring the CX Video Gateway .............................................25

 

Overview of configuring the CX Video Gateway ...............................................25

 

Gathering information .................................................................................26

 

Network configuration information (all models) ............................................26

 

ISDN configuration information (ISDN models) ............................................26

 

ISUP configuration information (ISUP models) .............................................27

 

Signaling Server configuration information (ISUP models) .............................29

 

Video Transcoder configuration information .................................................30

 

Logging into the gateway for the first time.....................................................31

 

Configuring the gateway to use a static IP address .......................................31

 

Obtaining an IP address through DHCP .......................................................32

 

Accessing the Vision Console........................................................................33

 

Creating or revising a configuration...............................................................34

 

Additional configuration tasks....................................................................35

 

Backing up a configuration...........................................................................36

 

Restoring a configuration.............................................................................37

 

Accessing the gateway using a secure shell....................................................38

 

Chapter 4:

 

Vision™ Console parameters.......................................................39

 

Configuration menu parameters ...................................................................39

 

Overview................................................................................................39

 

Date and Time ........................................................................................40

 

Host IP information..................................................................................41

 

Dialogic  

Содержание Vision CX Video










































































































































Отзывы: