Vision™ Console parameters
Dialogic® Vision™ CX Video Gateway Administration Manual
Provisioning menu parameters
The Provisioning menu contains the following pages:
•
Call routing table
•
CCXML application configuration
•
Video transcoder resource configuration
Call routing table
The Call routing table page defines routes for the CX Video Gateway using the
gateway routing table. Access this page by clicking
Gateway routes
on the
Provisioning menu. For information about using the routing table, including field
descriptions, see
Understanding the gateway routing table
on page 64 and
Using the
gateway routing table
on page 66.
CCXML application configuration
The CCXML application configuration page defines custom CCXML applications to the
CX Video Gateway. Access this page by clicking
CCXML applications
on the
Provisioning menu. For information about defining customized CCXML applications for
call routing, including field definitions, see
Fine tuning gateway routing
on page 126.
Video transcoder resource configuration
The Video transcoder resource configuration page defines video transcoder resources
for the CX Video Gateway, for implementations with licensed video transcoding ports.
Access this page by clicking
Video transcoder resources
on the Provisioning
menu.
To enable video transcoding, see the Resource configuration page on the
Configuration menu. For more information about video transcoding, see
Managing
video transcoder resources
on page 94.
Parameter
Description
ID
ID of the video transcoder system.
IP address
IP address of the video transcoder system to be used by the CX Video Gateway.
Enter the IP address and click
Add video transcoder
to add this video transcoder
system to the configuration. The IP address is added to the table as well as the system
name and number of channels.
Name
Video transcoder system name.
Channels
Number of full-duplex video transcoder channels available for use by the CX Video
Gateway.
Edit
Click
Remove
to remove the video transcoder system associated with this IP address
from the configuration.
After you have configured the video transcoder resources, click
Submit
to apply the
changes.
56
Dialogic
