Dialogic® Vision™ CX Video Gateway Administration Manual
Configuring the CX Video Gateway
Accessing the Vision Console
Use the Vision™ Console to configure and manage the CX Video Gateway. To access
the Vision™ Console, follow these steps:
Step
Action
1
Open one of the following local browsers. It is helpful to view the pages in full screen mode:
•
Mozilla 1.0 or later
•
Internet Explorer 6.0 or later
2
If this is the first time you are accessing the Vision™ Console, you must set up a host IP
address for it as described in
Logging into the gateway for the first time
on page 31.
Once you have configured the host IP address for the Vision™ Console, enter the configured
address.
3
Enter the following information:
•
User name (root, admin, or user)
•
Password (vision)
The console displays the Overview page, which contains information about the servers, media
boards, port rating, software version, installed patches, and licensing information for the CX
Video Gateway. This page also shows whether conferencing is enabled.
The user names for the Vision™ Console have the following rights:
User
Associated rights
name
root
Super-user that can change the CX Video Gateway model with assistance from Dialogic
Services and Support.
Note:
Appropriate licenses are required to change the gateway model.
admin
Administrator. This user can do everything an end user can do. In addition, this user can
change all CX Video Gateway configuration and provisioning settings, and can perform a
port capacity upgrade.
Note:
Appropriate licenses are required to perform a port capacity upgrade.
user
End user. This user can monitor and add routes, and monitor and add CCXML applications.
The options in the Configuration and Operations menus are read-only for this user.
Dialogic
33
